Table of Contents
Advertisement
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's QoS
Configuration object.
3.
Double-click the IP QoS Profiles object.
4.
From the list of IP QoS profiles that appears, click the one you want to edit.
A QoS L3/L4 Flow Priority dialog box similar to the following appears:
5.
Change the flow's name, priority, or fields by editing the appropriate options.
The values for these options were specified when the QoS profile was created. For
details on these options, see
If you are creating a new flow based on an existing one, changing the flow name is
optional. This lets you define flows that have the same name but different priority and
field values.
6.
Click OK.
You can redefine an IPX flow to change its name, priority, or fields. You can also redefine a
flow to create a new one based on an existing flow. To redefine an IPX flow:
1.
Start Configuration Expert if you have not already done so.
"Creating a QoS Profile for an IP Flow" on page
173.
Advertisement
Table of Contents
