Table of Contents
Advertisement
2.
Open the configuration file you want to modify and then double-click that file's QoS
Configuration object.
3.
Double-click the IPX QoS Profiles object.
4.
From the list of IPX QoS profiles that appears, click the one you want to edit.
An IPX Policy Definition dialog box similar to the following appears:
5.
Change the flow's name, priority, or fields by editing the appropriate options.
The values for these options were specified when the QoS profile was created. For
details on these options, see
If you are creating a new flow based on an existing one, changing the flow name is
optional. This lets you define flows that have the same name but different priority and
field values.
6.
Click OK.
You can redefine a Layer-2 flow to change its name, priority, or fields. You can also
redefine a flow to create a new one based on an existing flow. To redefine a Layer-2 flow:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's QoS
Configuration object.
"Creating a QoS Profile for an IPX Flow" on page
178.
Advertisement
Table of Contents
