Default Settings - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Example 20-5 Displays the VSAN Usage
switch# show vsan usage
4 vsan configured
configured vsans:1-4
vsans available for configuration:5-4093
Example 20-6 Displays All VSANs
switch# show vsan
vsan 1 information
vsan 2 information
vsan 7 information
vsan 100 information
vsan 4094:isolated vsan
Default Settings
Table 20-2
Table 20-2
Parameters
Default VSAN
State
Name
Load-balancing attribute
Cisco MDS 9000 Family CLI Configuration Guide
20-12
name:VSAN0001 state:active
in-order guarantee:no interoperability mode:no
loadbalancing:src-id/dst-id/oxid
name:VSAN0002 state:active
in-order guarantee:no interoperability mode:no
loadbalancing:src-id/dst-id/oxid
name:VSAN0007 state:active
in-order guarantee:no interoperability mode:no
loadbalancing:src-id/dst-id/oxid
name:VSAN0100 state:active
in-order guarantee:no interoperability mode:no
loadbalancing:src-id/dst-id/oxid
lists the default settings for all configured VSANs.
Default VSAN Parameters
Default
VSAN 1.
Active state.
Concatenation of VSAN and a four-digit string representing the
VSAN ID. For example, VSAN 3 is VSAN0003.
OX ID (src-dst-ox-id).
Chapter 20 Configuring and Managing VSANs
OL-18084-01, Cisco MDS NX-OS Release 4.x