Configuring Common Roles - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Configuring Common Roles

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Example 32-3 Displays Information on the Pending Roles Database
switch# show role pending
Role: network-admin
Description: Predefined Network Admin group. This role cannot be modified
Access to all the switch commands
Role: network-operator
Description: Predefined Network Operator group. This role cannot be modified
Access to Show commands and selected Exec commands
Role: svc-admin
Description: Predefined SVC Admin group. This role cannot be modified
Access to all SAN Volume Controller commands
Role: svc-operator
Description: Predefined SVC Operator group. This role cannot be modified
Access to selected SAN Volume Controller commands
Role: TechDocs
vsan policy: permit (default)
Role: sangroup
Description: SAN management group
vsan policy: deny
Permitted vsans: 10-30
---------------------------------------------
Rule
---------------------------------------------
Role: myrole
vsan policy: permit (default)
---------------------------------------------
Rule
---------------------------------------------
Use the show role pending-diff command to display the differences between the pending and
configuration role database. See
Example 32-4 Displays the Differences Between the Two Databases
switch# show role pending-diff
Configuring Common Roles
The CLI and SNMP in all switches in the Cisco MDS 9000 Family use common roles. You can use
SNMP to modify a role that was created using the CLI and vice versa (see
Cisco MDS 9000 Family CLI Configuration Guide
32-8
Type Command-type
1. permit config
2. deny config
3. permit debug
4. permit exec
Type Command-type
1. permit config
+Role: myrole
+ vsan policy: permit (default)
+ ---------------------------------------------
+ Rule Type Command-type
+ ---------------------------------------------
+ 1. permit config
Feature
*
fspf
zone
fcping
Feature
fspf
Example 32-4.
Feature
fspf
Chapter 32 Configuring Users and Common Roles
Figure 32-1).
OL-18084-01, Cisco MDS NX-OS Release 4.x