Displaying Trunking Information - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Cisco mds 9000 family cli configuration guide - release 4.x (ol-18084-01, february 2009)
Hide thumbs Also See for AP776A - Nexus Converged Network Switch 5020:
Table of Contents

Advertisement

Chapter 16
Configuring Trunking
D r a f t Ve r s i o n 3 - 0 3 D e c 2 0 0 8 - C i s c o C o n f i d e n t i a l
switch(config)# feature npiv
Step 3
Configure the port mode to auto, F, or Fx on the MDS core switch:
switch(config)# interface fc1/2
switch(config-if)# switchport mode F
Configure the trunk mode to ON on the MDS core switch:
Step 4
switch(config-if)# switchport trunk mode on
Configure the port mode to NP on the NPV switch:
Step 5
switch(config)# interface fc1/2
switch(config-if)# switchport mode NP
Configure the trunk mode to ON on the NPV switch:
Step 6
switch(config-if)# switchport trunk mode on
Set the port administrative state on NPIV and NPV switches to ON:
Step 7
switch(config)# interface fc1/2
switch(config-if)# shut
switch(config-if)# no shut

Displaying Trunking Information

The show interface command is invoked from the EXEC mode and displays trunking configurations for
a TE port. Without any arguments, this command displays the information for all of the configured
interfaces in the switch. See Examples
Example 16-1 Displays a Trunked Fibre Channel Interface
switch# show interface fc1/13
fc1/13 is trunking
OL-18084-01, Cisco MDS NX-OS Release 4.x
Hardware is Fibre Channel
Port WWN is 20:0d:00:05:30:00:58:1e
Peer port WWN is 20:0d:00:05:30:00:59:1e
Admin port mode is auto, trunk mode is on
Port mode is TE
Port vsan is 1
Speed is 2 Gbps
Receive B2B Credit is 255
Beacon is turned off
Trunk vsans (admin allowed and active) (1)
Trunk vsans (up)
Trunk vsans (isolated)
Trunk vsans (initializing)
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
233996 frames input, 14154208 bytes, 0 discards
0 CRC, 0 unknown class
0 too long, 0 too short
236 frames output, 13818044 bytes, 0 discards
11 input OLS, 12 LRR, 10 NOS, 28 loop inits
34 output OLS, 19 LRR, 17 NOS, 12 loop inits
16-1
to 16-3.
(1)
()
()
Cisco MDS 9000 Family CLI Configuration Guide
Displaying Trunking Information
16-13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents