Verifying Interoperating Status - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 30 Advanced Features and Concepts
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
•
•

Verifying Interoperating Status

This section highlights the commands used to verify if the fabric is up and running in interoperability
mode.
To verify the resulting status of issuing the interoperability command in any switch in the Cisco MDS
9000 Family, follow these steps:
Use the show version command to verify the version.
Step 1
switch# show version
Cisco Storage Area Networking Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2003, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
Cisco Systems, Inc. and/or other third parties and are used and
distributed under license. Some parts of this software are covered
under the GNU Public License. A copy of the license is available
at http://www.gnu.org/licenses/gpl.html.
Software
BIOS:
loader:
kickstart: version 2.0(1) [build 2.0(0.6)] [gdb]
system:
BIOS compile time:
kickstart image file is: bootflash:///m9500-sf1ek9-kickstart-mzg.2.0.0.6.bin
kickstart compile time:
system image file is:
system compile time:
Hardware
RAM 1024584 kB
bootflash: 1000944 blocks (block size 512b)
slot0:
172.22.92.181 uptime is 0 days 2 hours 18 minute(s) 1 second(s)
Last reset at 970069 usecs after Tue Sep 16 22:31:25 1980
OL-18084-01, Cisco MDS NX-OS Release 4.x
Force a fabric reconfiguration with the disruptive option.
switch(config)# fcdomain restart disruptive vsan 1
or
Do not force a fabric reconfiguration.
switch(config# fcdomain restart vsan 1
version 1.0.8
version 1.1(2)
version 2.0(1) [build 2.0(0.6)] [gdb]
0 blocks (block size 512b)
Reason: Reset Requested by CLI command reload
System version: 2.0(0.6)
Service:
08/07/03
10/25/2010 12:00:00
bootflash:///m9500-sf1ek9-mzg.2.0.0.6.bin
10/25/2020 12:00:00
Cisco MDS 9000 Family CLI Configuration Guide
Switch Interoperability
30-17