Placing Cups In A Zone; Displaying Control Unit Information - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Cisco mds 9000 family cli configuration guide - release 4.x (ol-18084-01, february 2009)
Hide thumbs Also See for AP776A - Nexus Converged Network Switch 5020:
Table of Contents

Advertisement

Chapter 29
Configuring FICON
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
CUP is supported by switches and directors in the Cisco MDS 9000 Family. The CUP function allows
the mainframe to manage the Cisco MDS switches.
Host communication includes control functions such as blocking and unblocking ports, as well as
monitoring and error reporting functions.
This section includes the following topics:

Placing CUPs in a Zone

To place the CUP in a zone, follow these steps:
Set the default zone to permit for the required VSAN.
Step 1
switch# config t
switch(config)# zone default-zone permit vsan 20
Step 2
Issue the show fcns database command for the required VSAN and obtain the required FICON CUP
WWN.
switch# show fcns database vsan 20
VSAN 20:
--------------------------------------------------------------------------
FCID
--------------------------------------------------------------------------
0x0d0d00
0x0dfe00
0x200400
0x200800
0x20fe00
Total number of entries = 5
Note
Step 3
Add the identified FICON:CUP WWN to the zone database.
switch(config)# zone name Zone1 vsan 20
switch(config-zone)# member pwwn 25:00:00:0c:ce:5c:5e:c2

Displaying Control Unit Information

Example 29-9
Example 29-9 Displays Control Unit Information
switch# show ficon control-device sb3
OL-18084-01, Cisco MDS NX-OS Release 4.x
Placing CUPs in a Zone, page 29-41
Displaying Control Unit Information, page 29-41
TYPE
PWWN
N
50:06:04:88:00:1d:60:83 (EMC)
N
25:00:00:0c:ce:5c:5e:c2 (Cisco)
N
50:05:07:63:00:c2:82:d3 (IBM)
N
50:05:07:64:01:40:15:0f (IBM)
N
20:00:00:0c:30:ac:9e:82 (Cisco)
If more than one FICON:CUP WWN exists in this fabric, be sure to add all the FICON:CUP
WWN PWWNs to the required zone. The previous sample output displays multiple
FICON:CUP occurrences to indicate a cascade configuration.
displays configured control device information.
(VENDOR)
FC4-TYPE:FEATURE
FICON:CU
FICON:CUP
scsi-fcp FICON:CU f..
FICON:CH
FICON:CUP
Cisco MDS 9000 Family CLI Configuration Guide
CUP In-Band Management
29-41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents