Sample Configuration - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 38 Configuring FC-SP and DHCHAP
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
DHCHAP_GROUP_NULL
DHCHAP_GROUP_1536
DHCHAP_GROUP_1024
DHCHAP_GROUP_1280
DHCHAP_GROUP_2048
Example 38-5 Displays the DHCHAP Local Password Database
switch# show fcsp dhchap database
DHCHAP Local Password:
Other Devices' Passwords:
Example 38-6 Displays the ASCII Representation of the Device WWN
switch# show fcsp asciiwwn 30:11:bb:cc:dd:33:11:22
Ascii representation of WWN to be used with AAA servers:Ox_3011bbccdd331122
Use the ASCII representation of the device WWN (identified in bold in
Tip
switch information on RADIUS and TACACS+ servers.

Sample Configuration

This section provides the steps to configure the example illustrated in
Figure 38-2
MDS-9216
To configure the authentication setup shown in
Step 1 Obtain the device name of the MDS 9216 Switch in the fabric. The MDS 9216 Switch in the fabric is
identified by the switch WWN.
MDS-9216# show wwn switch
Switch WWN is 20:00:00:05:30:00:54:de
Step 2 Explicitly enable DHCHAP in this switch.
Note
OL-18084-01, Cisco MDS NX-OS Release 4.x
Non-device specific password:**********
Password for device with WWN:29:11:bb:cc:dd:33:11:22 is ******
Password for device with WWN:30:11:bb:cc:dd:33:11:22 is *********
Password for device with WWN:00:11:22:33:44:aa:bb:cc is ***********
Sample DHCHAP Authentication
Password sent by MDS-9216 to MDS-9509
int fc 1/6
Password sent by MDS-9509 to MDS-9216
When you disable DHCHAP, all related configurations are automatically discarded.
Example
Figure
int fc 4/5
MDS-9509
Figure 38-2, follow these steps:
Cisco MDS 9000 Family CLI Configuration Guide
Sample Configuration
38-6) to configure the
38-2.
38-11