Configuring Ivr Logging Levels; Verifying Logging Level Configuration - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 23 Configuring Inter-VSAN Routing
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
----------------------------------------------------
Number of Virtual-fcid entries: 3
Example 23-5 Displays the IVR fcdomain Database Entries for a Specific AFID and VSAN
switch# show ivr fcdomain database autonomous-fabric-num 21 vsan 22
----------------------------------------------------
AFID
----------------------------------------------------
Number of Virtual-domain entries: 1
----------------------------------------------------
AFID
----------------------------------------------------
Number of Virtual-fcid entries: 3

Configuring IVR Logging Levels

To configure the severity level for logging messages from the IVR feature, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# logging level ivr 4

Verifying Logging Level Configuration

Use the show logging level command to view the configured logging level for the IVR feature.
switch# show logging level
Facility
--------
...
ivr
...
0(emergencies)
3(errors)
6(information)
OL-18084-01, Cisco MDS NX-OS Release 4.x
21 22 11:22:33:44:55:66:77:88
21 22 21:22:33:44:55:66:77:88
21 22 21:22:33:44:55:66:78:88
Vsan Native-AFID
21 22 20
Vsan Pwwn
21 22 11:22:33:44:55:66:77:88
21 22 21:22:33:44:55:66:77:88
21 22 21:22:33:44:55:66:78:88
Default Severity
----------------
5
1(alerts)
4(warnings)
7(debugging)
0x114466
0x0c4466
0x0c4466
Native-Vsan Virtual-domain
11 0xc(12)
Virtual-fcid
0x114466
0x0c4466
0x0c4466
Purpose
Enters configuration mode.
Configures Telnet or SSH logging for the IVR feature at
level 4 (warning). As a result, logging messages with a
severity level of 4 or above are displayed.
Current Session Severity
------------------------
4
2(critical)
5(notifications)
Cisco MDS 9000 Family CLI Configuration Guide
Configuring IVR
23-27