Configuring A 48-Port 8-Gbps Fibre Channel Switching Module Example - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Cisco mds 9000 family cli configuration guide - release 4.x (ol-18084-01, february 2009)
Hide thumbs Also See for AP776A - Nexus Converged Network Switch 5020:
Table of Contents

Advertisement

Chapter 15
Configuring Generation 2 and Generation 3 Switching Modules
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Configuring a 48-Port 8-Gbps Fibre Channel Switching Module Example

These steps describe how to configure the 48-port 8-Gbps module interfaces module:
Select the interfaces fc 4/1 through fc 4/2.
Step 1
switch# config t
switch(config)# interface fc 4/1 - 2
Configure the port speed, rate mode, and port mode on the interfaces.
Step 2
switch(config-if)# switchport speed 8000
switch(config-if)# switchport rate-mode shared
switch(config-if)# switchport mode f
Enable the interfaces and return to configuration mode.
Step 3
switch(config-if)# no shutdown
switch(config-if)# exit
switch#
Select the interfaces fc 4/3 through fc 4/4.
Step 4
switch# config t
switch(config)# interface fc 4/3 - 4
Configure the port speed, rate mode, and port mode on the interfaces.
Step 5
switch(config-if)# switchport speed auto max 4000
switch(config-if)# switchport rate-mode dedicated
switch(config-if)# switchport mode f
Step 6
Enable the interfaces and return to configuration mode.
switch(config-if)# no shutdown
switch(config-if)# exit
switch#
Select the interfaces fc 4/5 through fc 4/6.
Step 7
switch# config t
switch(config)# interface fc 4/5 - 6
Configure the port speed, rate mode, and port mode on the interfaces.
Step 8
switch(config-if)# switchport speed auto max 4000
switch(config-if)# switchport rate-mode shared
switch(config-if)# switchport mode f
Enable the interfaces and return to configuration mode.
Step 9
switch(config-if)# no shutdown
switch(config-if)# exit
switch#
OL-18084-01, Cisco MDS NX-OS Release 4.x
Configuring a 24-Port 4-Gbps Fibre Channel Switching Module Example, page 15-53
Configuring a 48-Port 4-Gbps Fibre Channel Switching Module Example, page 15-54
Cisco MDS 9000 Family CLI Configuration Guide
Example Configurations
15-51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents