Displaying Ha Status Information - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 10 Configuring High Availability
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
This example output shows that automatic copying is disabled:
switch# show boot auto-copy
Auto-copy feature disabled
Use the show boot auto-copy list command to verify what files are being copied. This example output
displays the image being copied to the standby supervisor module's bootflash. Once this is successful,
the next file will be image2.bin.
This command only displays files on the active supervisor module.
Note
switch# show boot auto-copy list
File: /bootflash:/image1.bin
Bootvar: kickstart
File:/bootflash:/image2.bin
Bootvar: system
This example output displays a typical message when the auto-copy option is disabled or if no files are
copied:
switch# show boot auto-copy list
No file currently being auto-copied

Displaying HA Status Information

Use the show system redundancy status command to view the HA status of the system. Tables
10-3
switch# show system redundancy status
Redundancy mode
---------------
This supervisor (sup-1)
-----------------------
Other supervisor (sup-2)
------------------------
The following conditions identify when automatic synchronization is possible:
•
•
Table 10-1
OL-18084-01, Cisco MDS NX-OS Release 4.x
explain the possible output values for the redundancy, supervisor, and internal states.
administrative: HA
operational: HA
Redundancy state: Active
Supervisor state: Active
Internal state: Active with HA standby
Redundancy state: Standby
Supervisor state: HA standby
Internal state: HA standby
If the internal state of one supervisor module is Active with HA standby and the other supervisor
module is HA-standby, the switch is operationally HA and can do automatic synchronization.
If the internal state of one of the supervisor modules is none, the switch cannot do automatic
synchronization.
lists the possible values for the redundancy states.
Displaying HA Status Information
Cisco MDS 9000 Family CLI Configuration Guide
10-1
to
10-5