Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 359

Cisco mds 9000 family cli configuration guide - release 4.x (ol-18084-01, february 2009)
Hide thumbs Also See for AP776A - Nexus Converged Network Switch 5020:
Table of Contents

Advertisement

Chapter 13
Configuring Interfaces
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The show tlport command displays the TL port interface configurations. This command provides a list
of all TL ports configured in a switch and shows the associated VSAN, the FC ID for the port (only
domain and area are valid), and the current operational state of the TL port (up or initializing). See
Example 13-17
Example 13-17 Displays the TL Ports in All VSANs
switch# show tlport list
-------------------------------
Interface Vsan FC-ID
------------------------- ------
fc1/16
fc2/26
TL ports allow a private device (devices that physically reside on the loop) to see a fabric device and
vice-versa by proxying fabric devices on the loop. Fabric devices are proxied by allocating each fabric
device an ALPA on this loop.
In addition to these proxied devices, other virtual devices (local or remote domain controller addresses)
are also allocated ALPAs on the loop. A switch reserves the ALPA for its own communication with
private devices, and the switch acts as a SCSI initiator.
The first column in the output of the show tlport interface command is the ALPA identity of the device
on the loop. The columns that follow include the port WWNs, the node WWNs for each device, the
device as a SCSI initiator or target, and the real FC ID of the device.
Example 13-18 Displays the Detailed Information for a Specific TL Port
switch# show tlport interface fc1/16 all
fc1/16 is up, vsan 1, FCID 0x420000
--------------------------------------------------------------------------------
alpa pWWN
--------------------------------------------------------------------------------
0x01 20:10:00:05:30:00:4a:de 20:00:00:05:30:00:4a:de Initiator Proxied 0xfffc42
0x73 22:00:00:20:37:39:ae:54 20:00:00:20:37:39:ae:54 Target
0xef 20:10:00:05:30:00:4a:de 20:00:00:05:30:00:4a:de Initiator Switch
Example 13-19 Displays TL Port Information for Private Devices
switch# show tlport interface fc 1/16 private
fc1/16 is up, vsan 1, FCID 0x420000
------------------------------------------------------------------------
alpa pWWN
------------------------------------------------------------------------
0x73 22:00:00:20:37:39:ae:54 20:00:00:20:37:39:ae:54 Target
0x74 22:00:00:20:37:38:d3:de 20:00:00:20:37:38:d3:de Target
Example 13-20 Displays TL Port Information for Proxied Devices
switch# show tlport interface fc 1/16 proxied
fc1/16 is up, vsan 1, FCID 0x420000
------------------------------------------------------------------------
alpa pWWN
------------------------------------------------------------------------
0x01 20:10:00:05:30:00:4a:de 20:00:00:05:30:00:4a:de Initiator 0xfffc42
0x02 21:00:00:e0:8b:01:95:e7 20:00:00:e0:8b:01:95:e7 Initiator 0x420100
OL-18084-01, Cisco MDS NX-OS Release 4.x
through
Example
13-20.
State
1
0x420000 Init
1
0x150000 Up
nWWN
nWWN
nWWN
SCSI Type Device
Private 0x420073
SCSI Type FC-ID
0x420073
0x420074
SCSI Type FC-ID
Cisco MDS 9000 Family CLI Configuration Guide
TL Ports for Private Loops
FC-ID
0x0000ef
13-33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents