Accessing File Systems On The Standby Supervisor Module; Deleting Configuration Files - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Accessing File Systems on the Standby Supervisor Module

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Step 2 Wait until all modules are back online. The module status displays ok in response to the show module
command.
Roll back to the saved configuration (see the
Step 3
page
Accessing File Systems on the Standby Supervisor Module
You can access all file systems on the standby supervisor module (remote) from a session on the active
supervisor module. This is useful when copying files to the active supervisor modules requires similar
files to exist on the standby supervisor module.
•
•

Deleting Configuration Files

Use the delete command to remove configuration files from the memory locations on the switch.
•
•
•
•
•
Cisco MDS 9000 Family CLI Configuration Guide
9-8
9-7).
Use the dir scheme://sup-remote command to list files on the standby supervisor module.
switch# dir bootflash://sup-remote
12198912 Aug 27 16:29:18 2003
1864931 Apr 29 12:41:59 2003
12288 Apr 18 20:23:11 2003
12097024 Nov 21 16:34:18 2003
41574014 Nov 21 16:34:47 2003
Usage for bootflash://sup-remote
67747169 bytes used
116812447 bytes free
184559616 bytes total
Use the delete scheme://sup-remote to remove files from a file system on the standby supervisor
module.
switch# delete bootflash://sup-remote/aOldConfig.txt
This example shows how to delete a file from the bootflash: file system:
switch# delete bootflash:dns_config.cfg
This example shows how to delete a file from an external CompactFlash (slot0:) file system:
switch# delete slot0:dns_config.cfg
This example shows how to delete the file named test from the flash card inserted in slot 0.
switch# delete slot0:test
Delete slot0:test? [y/n]: y
This example shows how to delete the entire my-dir directory and all its contents:
switch# delete bootflash:my-dir
This example shows how to delete a file in the bootflash: on the standby supervisor module:
switch# delete bootflash://sup-remote/aOldConfig
Chapter 9
"Rolling Back to a Previous Configuration" section on
m9500-sf1ek9-kickstart-mzg.1.3.0.39a.bin
dplug2
lost+found/
m9500-sf1ek9-kickstart-mz.1.3.1.1.bin
m9500-sf1ek9-mz.1.3.1.1.bin
OL-18084-01, Cisco MDS NX-OS Release 4.x
Working with Configuration Files