Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 241

Chapter 8 Software Images
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Extracting "system" version from image bootflash:/isan-164.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/boot-fs9124.
[####################] 100% -- SUCCESS
Extracting "bios" version from image bootflash:/isan-164.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module
------
Images will be upgraded according to following table:
Module
------
Do you want to continue with the installation (y/n)?
Before performing an upgrade, you may wish to use the show install all impact command to view the
effect of updating the system from the running image to another specified image.
switch# show install all impact kickstart bootflash:boot-fs9124 system bootflash:isan-164
Verifying image bootflash:/boot-fs9124 for boot variable "kickstart".
[####################] 100% -- SUCCESS
Verifying image bootflash:/isan-164 for boot variable "system".
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/isan-164.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/boot-fs9124.
[####################] 100% -- SUCCESS
Extracting "bios" version from image bootflash:/isan-164.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module
------
Images will be upgraded according to following table:
Module
------
switch#
OL-18084-01, Cisco MDS NX-OS Release 4.x
bootable Impact
-------- --------------
1 yes disruptive
Image Running-Version(pri:alt)
---------- -----------------------
1 system 3.1(1u)
1 kickstart 3.1(1u)
1 bios v1.0.0(10/04/06):v1.0.0(10/04/06) v1.0.0(10/04/06) no
bootable Impact
-------- --------------
1 yes non-disruptive
Image Running-Version(pri:alt)
---------- ------------------------
1 system 3.1(1u)
1 kickstart 3.1(1u)
1 bios v1.0.0(10/04/06): v1.0.0(10/04/06) v1.0.0(10/04/06) no
Nondisruptive Upgrades on Fabric and Modular Switches
Install-type Reason
------------ ------
reset insufficient resources<----Reason for failure
New-Version
-----------
3.1(1)
3.1(1)
[n]
Install-type Reason
------------ ------
reset
New-Version
-----------
3.1(1)
3.1(1)
Cisco MDS 9000 Family CLI Configuration Guide
Upg-Required
--------------------
yes
yes
Upg-Required
-------------
yes
yes
8-23