Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 208

CFS Merge Support
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
----------------------------------------------------------------
238
Remote Fabric
----------------------------------------------------------------
Domain Switch WWN
----------------------------------------------------------------
236
Logical [VSAN 2] Merge Status: Success
Local Fabric
----------------------------------------------------------------
Domain Switch WWN
----------------------------------------------------------------
211
1
Logical [VSAN 3] Merge Status: Success
Local Fabric
----------------------------------------------------------------
Domain Switch WWN
----------------------------------------------------------------
221
103
The following example of the show cfs merge status name command output displays an application
using the physical scope with a merge failure. The command uses the specified application name to
display the merge status based on the application scope.
switch# show cfs merge status name ntp
Physical
Local Fabric
---------------------------------------------------------
Switch WWN
---------------------------------------------------------
20:00:00:05:30:00:6b:9e
Remote Fabric
---------------------------------------------------------
Switch WWN
---------------------------------------------------------
20:00:00:0e:d7:00:3c:9e
The show cfs peers command output displays all the switches in the physical fabric in terms of the
switch WWN and the IP address. The local switch is indicated as Local.
switch# show cfs peers
Physical Fabric
-------------------------------------------------
Switch WWN
-------------------------------------------------
20:00:00:05:30:00:6b:9e
20:00:00:0e:d7:00:3c:9e
Total number of entries = 2
The show cfs peers name command displays all the peers for which a particular application is registered
with CFS. The command output shows all the peers for the physical scope or for each of the valid VSANs
on the switch, depending on the application scope. For physical scope, the switch WWNs for all the peers
are indicated. The local switch is indicated as Local.
Cisco MDS 9000 Family CLI Configuration Guide
7-10
20:00:00:05:30:00:6b:9e
20:00:00:0e:d7:00:3c:9e
20:00:00:05:30:00:6b:9e
20:00:00:0e:d7:00:3c:9e
20:00:00:05:30:00:6b:9e
20:00:00:0e:d7:00:3c:9e
Merge Status: Failed
IP Address
10.76.100.167
IP Address
10.76.100.169
IP Address
10.76.100.167
10.76.100.169
10.76.100.167 [Merge Master]
IP Address
10.76.100.169 [Merge Master]
IP Address
10.76.100.167 [Merge Master]
10.76.100.169
IP Address
10.76.100.167 [Merge Master]
10.76.100.169
[Merge Master]
[Merge Master]
[Local]
Chapter 7 Using the CFS Infrastructure
OL-18084-01, Cisco MDS NX-OS Release 4.x