Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 745

Chapter 29 Configuring FICON
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
...
Port address 80
Example 29-16 Displays All FICON Configuration Files
switch# show ficon vsan 2
Ficon information for VSAN 2
Ficon is enabled
VSAN is active
Host control is Enabled
Host offline control is Enabled
Clock alert mode is Disabled
User alert mode is Disabled
SNMP control is Disabled
Active=Saved is Disabled
Number of implemented ports are 250
Key Counter is 9
FCID last byte is 0
Date/Time is same as system time(Sun Dec 14 01:26:30.273402 1980)
Device Allegiance not locked
Codepage is us-canada
Saved configuration files
Example 29-17 Displays the Specified Port Addresses for a FICON Configuration File
switch# show ficon vsan 2 file iplfile1 portaddress 1-7
FICON configuration file IPLFILE1 in vsan 2
...
OL-18084-01, Cisco MDS NX-OS Release 4.x
Port name is
Port is not blocked
Prohibited port addresses are 0,81-253,255
Port address 254
Port name is
Port is not blocked
Prohibited port addresses are 0,81-253,255
IPL
IPLFILE1
Port address 1
Port name is
Port is not blocked
Prohibited port addresses are 0,241-253,255
Port address 2
Port name is
Port is not blocked
Prohibited port addresses are 0,241-253,255
Port address 3
Port name is P3
Port is not blocked
Prohibited port addresses are 0,241-253,255
Port address 7
Port name is
Port is not blocked
Prohibited port addresses are 0,241-253,255
Displaying FICON Information
Cisco MDS 9000 Family CLI Configuration Guide
29-45