Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 706

About FICON
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Cisco MDS 9000 Family CLI Configuration Guide
29-6
zoning, read-only zones, and VSAN-based access control. See
and TACACS+" Chapter 38, "Configuring FC-SP and DHCHAP,"
Fabric Binding."
Traffic encryption—IPSec is supported over FCIP. You can encrypt FICON and Fibre Channel
traffic that is carried over FCIP. See
Local accounting log—View the local accounting log to locate FICON events. See the
Authentication" section on page 34-34
Unified storage management—Cisco MDS 9000 FICON-enabled switches are fully IBM CUP
standard compliant for in-band management using the IBM S/A OS/390 I/O operations console. See
the "CUP In-Band Management" section on page
Port address-based configurations—Configure port name, blocked or unblocked state, and the
prohibit connectivity attributes can be configured on the ports. See the
section on page 29-23.
You can display the following information:
Individual Fibre Channel ports, such as the port name, port number, Fibre Channel address,
–
operational state, type of port, and login data.
Nodes attached to ports.
–
Port performance and statistics.
–
Configuration files—Store and apply configuration files. See the
section on page 29-32.
FICON and Open Systems Management Server features if installed. —See the
and FCP Mixing" section on page
Enhanced cascading support—See the
Date and time—Set the date and time on the switch. See the
Timestamp" section on page
Configure SNMP trap recipients and community names—See the
FICON Parameters" section on page
Call Home configurations—Configure the director name, location, description, and contact person.
See Chapter 53, "Configuring Call Home."
Configure preferred domain ID, FC ID persistence, and principal switch priority—See
"Configuring Domain Parameters."
Sophisticated SPAN diagnostics—The Cisco MDS 9000 Family provides industry-first intelligent
diagnostics, protocol decoding, and network analysis tools as well as integrated Call Home
capability for added reliability, faster problem resolution, and reduced service costs. See
"Monitoring Network Traffic Using SPAN."
Configure R_A_TOV, E_D_TOV—— See the
page 30-5.
Director-level maintenance tasks—Perform maintenance tasks for the director including
maintaining firmware levels, accessing the director logs, and collecting data to support failure
analysis. See Chapter 59, "Monitoring System Processes and Logs."
Port-level incident alerts—Display and clear port-level incident alerts. See the
Information" section on page
Chapter 37, "Configuring IPsec Network Security."
and "Local AAA Services" section on page
29-40.
29-5.
"CUP In-Band Management" section on page
29-20.
29-21.
"Fibre Channel Time Out Values" section on
29-32.
Chapter 29 Configuring FICON
Chapter 34, "Configuring RADIUS
and Chapter 40, "Configuring
34-35.
"Configuring FICON Ports"
"FICON Configuration Files"
"VSANs for FICON
29-40.
"Allowing the Host to Control the
"Configuring SNMP Control of
"Clearing RLIR
OL-18084-01, Cisco MDS NX-OS Release 4.x
"MSCHAP
Chapter 18,
Chapter 51,