Verifying Scheduler Configuration; Deleting A Schedule; Removing An Assigned Job - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Configuring the Command Scheduler
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Verifying Scheduler Configuration

To display the scheduler configuration, use the show scheduler config command.
switch# show scheduler config
config terminal
feature scheduler
scheduler logfile size 512
end
config terminal
end
config terminal
scheduler schedule name configureVsan99
end

Deleting a Schedule

To delete a schedule, follow these steps:
Command
Step 1
switch# conf t
switch(config)#
Step 2
switch(config)# no scheduler schedule name
weekendbackup

Removing an Assigned Job

To remove an assigned job, follow these steps:
Command
Step 1
switch# conf t
switch(config)#
Step 2
switch(config)# scheduler schedule name
weekendbackupqos
switch(config-schedule)#
Step 3
switch(config-schedule)# no job name addMem99
Cisco MDS 9000 Family CLI Configuration Guide
19-8
scheduler job name addMemVsan99
config terminal
vsan database
vsan 99 interface fc1/1
vsan 99 interface fc1/2
vsan 99 interface fc1/3
vsan 99 interface fc1/4
time start 2004:8:10:9:52
job name addMemVsan99
Chapter 19 Scheduling Maintenance Jobs
Purpose
Enters the configuration mode.
Deletes the defined schedule.
Purpose
Enters the configuration mode.
Specifies a job schedule (weekendbackupqos)
and enters the submode for that schedule.
Removes a job (addMem99) assigned to this
schedule.
OL-18084-01, Cisco MDS NX-OS Release 4.x