Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 478

Verifying the PortChannel Configuration
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Example 17-6 Displays the PortChannel Usage
switch# show port-channel usage
Totally 3 port-channel numbers used
===================================
Used
Unused:
Example 17-7 Displays the PortChannel Compatibility
switch# show port-channel compatibility-parameters
physical port layer
Use the existing show commands to obtain further details on autocreated channel group attributes.
Autocreated PortChannels are indicated explicitly to help differentiate them from the manually created
PortChannels. See Examples
Example 17-8 Displays Autocreated PortChannels
switch# show interface fc1/1
fc1/1 is trunking
...
Example 17-9 Displays the Specified PortChannel Interface
switch# show port-channel database interface port-channel 128
port-channel 128
Example 17-10 Displays the PortChannel Summary
switch# show port-channel summary
------------------------------------------------------------------------------
Interface
------------------------------------------------------------------------------
port-channel 1
port-channel 2
port-channel 3
port-channel 4
port-channel 5
port-channel 6
Cisco MDS 9000 Family CLI Configuration Guide
17-24
: 77 - 79
1 - 76 , 80 - 256
port mode
trunk mode
speed
port VSAN
port allowed VSAN list
17-8
Hardware is Fibre Channel, FCOT is short wave laser
Port WWN is 20:0a:00:0b:5f:3b:fe:80
...
Receive data field Size is 2112
Beacon is turned off
Port-channel auto creation is enabled
Belongs to port-channel 123
Administrative channel mode is active
Operational channel mode is active
Last membership update succeeded
Channel is auto created
First operational port is fc1/1
1 ports in total, 1 ports up
Ports: fc1/1 [up] *
fibre channel or ethernet
E/AUTO only
to 17-10.
Total Ports Oper Ports
1
1
0
0
1
0
Chapter 17 Configuring PortChannels
First Oper Port
0 --
1 fc8/13
0 --
0 --
1 fc8/3
0 --
OL-18084-01, Cisco MDS NX-OS Release 4.x