Displaying The Configured Ficon State; Displaying A Port Administrative State - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Displaying FICON Information
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Displaying the Configured FICON State

If FICON is enabled on a VSAN, you can display the port address information for that VSAN (see
Example
Example 29-18 Displays the Specified Port Address When FICON Is Enabled
switch# show ficon vsan 2 portaddress 55
Port Address 55 is not installed in vsan 2

Displaying a Port Administrative State

Examples
show ficon vsan number portaddress number command displays the blocked state of the port. If a
specific port is prohibited, this command also displays the specifically prohibited port (3) along with the
ports that are prohibited by default (0, 241 to 253, and 255). If a name is assigned, that name is also
displayed.
Example 29-19 Displays an Administratively Unblocked Port
switch# show ficon vsan 2 portaddress 2
Port Address 2(0x2) is not installed in vsan 2
Example 29-20 Displays an Administratively Blocked Port
switch# show ficon vsan 2 portaddress 1
Port Address 2(0x2) is not installed in vsan 2
Cisco MDS 9000 Family CLI Configuration Guide
29-46
29-18).
Port number is 55, Interface is fc2/23
Port name is
Port is not admin blocked
Prohibited port addresses are 0,241-253,255
Admin port mode is FL
Port mode is FL, FCID is 0xea0000
29-19 to 29-20 display the administrative state of a FICON port. If the port is blocked, the
Port number is 2(0x2), Interface is fc1/2
Port name is
Port is not admin blocked
Prohibited port addresses are 0,241-253,255(0,0xf1-0xfd,0xff)
Admin port mode is auto
Peer is Unknown
Port number is 2(0x2), Interface is fc1/2
Port name is SampleName
Port is admin blocked
Prohibited port addresses are 0,241-253,255(0,0xf1-0xfd,0xff)
Admin port mode is auto
Peer is Unknown
Chapter 29 Configuring FICON
OL-18084-01, Cisco MDS NX-OS Release 4.x