Specifying File Systems - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual

Chapter 2 Before You Begin
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
•
•
•

Specifying File Systems

The syntax for specifying a file system is scheme:[//server/].
components.
Table 2-4
Scheme
bootflash
slot0
usb1
usb2
volatile
nvram
log
OL-18084-01, Cisco MDS NX-OS Release 4.x
Saving Command Output to a File, page 2-32
Compressing and Uncompressing Files, page 2-32
Displaying the Last Lines in a File, page 2-33
File System Syntax Components
Server
sup-active
sup-local
sup-1
sup-standby
sup-remote
sup-2
module-5
module-6
module-7
module-8
—
—
—
—
—
—
Cisco MDS 9000 Family CLI Configuration Guide
Using Switch File Systems
Table 2-4 describes the file system syntax
Description
Internal CompactFlash memory located on
the active supervisor used for storing
system images, configuration files, and
other miscellaneous files.
Internal CompactFlash memory located on
the standby supervisor used for storing
system images, configuration files, and
other miscellaneous files.
Internal CompactFlash memory located on
slot0 or usb1 or usb2 of the active or
standby supervisor in Cisco MDS 9506
and Cisco MDS 9509 switches.
Internal CompactFlash memory located on
slot0 or usb1 or usb2 of the active or
standby supervisor in Cisco MDS 9513
Directors.
External CompactFlash installed in a
supervisor module used for storing system
images, configuration files, and other
miscellaneous files
External CompactFlash installed in the
usb1 slot.
External CompactFlash installed in the
usb2 slot.
Volatile random-access memory (VRAM)
located on a supervisor module used for
temporary or pending changes
Nonvolatile random-access memory
(NVRAM) located on a supervisor module
used for storing the startup-config file
Memory on the active supervisor that
stores logging file statistics
2-27