Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual page 229

Chapter 8 Software Images
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Do you want to continue with the installation (y/n)?
Install is in progress, please wait.
Syncing image bootflash:/kickstart-img to standby.
[####################] 100% -- SUCCESS
Syncing image bootflash:/system-img to standby.
[####################] 100% -- SUCCESS
Jan 18 23:40:03 Hacienda %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configuring console from
Performing configuration copy.
[####################] 100% -- SUCCESS
Module 6: Waiting for module online.
|
Auto booting bootflash:/kickstart-img bootflash:/system-img...
Booting kickstart image: bootflash:/kickstart-img....
.....................................Image verification OK
Starting kernel...
INIT: version 2.78 booting
Checking all filesystems..r.r.. done.
Loading system software
Uncompressing system image: bootflash:/system-img
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCC
INIT: Entering runlevel: 3
Exit the switch console and open a new terminal session to view the upgraded supervisor module using
Step 7
the show module command.
If the configuration meets all guidelines when the install all command is issued, all modules (supervisor
and switching) are upgraded. This is true for any switch in the Cisco MDS 9000 Family.
Caution
OL-18084-01, Cisco MDS NX-OS Release 4.x
4 slc
4 bios v1.1.0(10/24/03)
5 system
5 kickstart
5 bios v1.1.0(10/24/03)
5 loader
6 system
6 kickstart
6 bios v1.1.0(10/24/03)
6 loader
If a nondisruptive upgrade operation fails for any reason other than those listed in the
"Recognizing Failure Cases" section on page
representative for further assistance.
If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you
purchased support directly from Cisco Systems, contact Cisco Technical Support at this URL:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
1.3(2a)
v1.1.0(10/24/03)
1.3(2a)
1.3(2a)
v1.1.0(10/24/03)
1.2(2)
1.3(2a)
1.3(2a)
v1.1.0(10/24/03)
1.2(2)
[n] y
8-8, contact your reseller or Cisco
Cisco MDS 9000 Family CLI Configuration Guide
Automated Upgrades
1.3(1) yes
no
1.3(1) yes
1.3(1) yes
no
1.2(2) no
1.3(1) yes
1.3(1) yes
no
1.2(2) no
8-11