Send Firmware Confirmation Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

Repair Information
3. Before downloading firmware version XX.YY.ZZ to a switch, ensure version
4. Select the icon representing the switch for which a firmware version is to be
5. As a precaution to preserve switch configuration information, perform the
6. At the navigation control panel, select Firmware Library from the
7. Select the firmware version to be downloaded and click Send. The send
Figure 48: Send Firmware confirmation dialog box
8. Click Yes. The Send Firmware dialog box displays.
164
XX.YY.ZZ or higher of the HAFM application is running on the HAFM
server.
a. Select About from the Help menu. The About dialog box displays the
HAFM application version. Click OK to close the dialog box.
b. If required, install the correct version of the HAFM application
or Upgrade Software" on page 170).
downloaded. The Hardware View for the selected switch displays.
data collection procedure
Maintenance menu. The Firmware Library dialog box displays.
function verifies existence of certain switch conditions before the download
begins. If an error occurs, a message displays indicating the problem must be
fixed before the firmware download. Conditions that terminate the process
include:
— The firmware version is being installed to the switch by another user.
— The switch-to-HAFM server link fails or times out.
If a problem occurs and a corresponding message displays, go to
Start MAP" on page 33 to isolate the problem. If no error occurs, the Send
Firmware confirmation box displays.
As the download begins, a Sending Files message displays at the top of
the dialog box. This message remains for a few moments as a progress bar
travels across the dialog box to show percent completion of the download. As
the download progresses, a Writing data to FLASH message displays.
("Collecting Maintenance
("Install
page 148
Data" on
"MAP 0000:
Edge Switch 2/24 Service Manual
).