Event Codes - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

Event Codes

This appendix lists all three-digit HP StorageWorks Edge Switch 2/24 event codes
and provides detailed information about each code. Event codes are listed in
numerical order and in tabular format.
An event is an occurrence (state change, problem detection, or problem
correction) that requires user attention or that should be reported to a system
administrator or service representative. An event usually indicates a switch
operational state transition, but may also indicate an impending state change
(threshold violation). An event may also provide information only, and not
indicate an operational state change. Event codes are grouped as follows:
•
•
•
•
•
•
Events can be recorded in the switch Event Logs at the HAFM server, at a remote
workstation if E-mail and call-home features are enabled, or at a simple network
management protocol (SNMP) workstation. An event may also illuminate the
system error (ERR) light-emitting diode (LED) on the front panel.
In addition to numerical event codes, the tables in this appendix also provide the
following information about each code:
•
Edge Switch 2/24 Service Manual
000 through 199–system events.
200 through 299–power supply events.
300 through 399–fan events.
400 through 499–CTP card events.
500 through 599–port module events.
800 through 899–Thermal
Message–a brief text string that describes the event.
B
225