Repair Information
This chapter describes the repair and repair-related procedures for the HP
StorageWorks Edge Switch 2/24, and associated field-replaceable units (FRUs).
These procedures are described:
Do not perform repairs until a failure is isolated to a FRU. If fault isolation was
not performed, refer to
Edge Switch 2/24 Service Manual
Obtaining log information at the HP StorageWorks HA-Fabric Manager
(HAFM) server.
Obtaining and interpreting port diagnostic and performance data, and
performing port diagnostic loopback tests.
Collecting maintenance data.
Setting the switch online or offline.
Blocking or unblocking Fibre Channel ports.
Cleaning fiber-optic components.
Powering the switch on and off.
Performing an initial machine load (IML).
Performing an initial program load (IPL).
Performing a switch reset.
Managing firmware versions.
Managing configuration data.
Installing or upgrading software.
"MAP 0000: Start
MAP" on page 33.
3
125