HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 205

Table 25: HAFM application messages (Continued)
The maximum number
of zones allowed has
already been
configured.
The maximum number
of zone sets has
already been
configured.
The maximum number
of zones per zone set
has already been
configured.
The nickname does not
exist.
The nickname is
already assigned.
Either use a different
name or do not save
the name as a
nickname.
The software version
on this HAFM server is
not compatible with
the version on the
remote HAFM server.
The zoning library
conversion must be
completed before
continuing.
This fabric log is no
longer valid because
the fabric has been
unpersisted.
Edge Switch 2/24 Service Manual
Message
The maximum number
of zones that can be
defined was reached.
The maximum number
of zone sets that can
be defined was
reached.
The maximum number
of zones that can be
defined in a zone set
was reached.
The entered nickname
does not exist in the
fabric.
The entered nickname
already exists in the
fabric. Each nickname
must be unique.
A second HAFM
server PC (client)
connecting to the
HAFM server must be
running the same
software version to log
in.
The zoning library
conversion is
incomplete and the
requested operation
cannot continue.
The selected Fabric
Log is no longer
available because the
fabric was
unpersisted.
Description
Delete an existing zone before
adding a new zone.
Delete an existing zone set
before adding a new zone set.
Delete an existing zone before
adding a new zone to the zone
set.
Configure the nickname to the
appropriate product or select
an existing nickname.
Define a different nickname.
Upgrade the software version
on the downlevel HAFM server
PC.
Complete the zoning library
conversion, then retry the
operation.
To start a new log for the
fabric, persist the fabric
through the Persist Fabric
dialog box.
Messages
Action
203