Refresh The Event Log; Clear The Event Log; Hardware Log - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

Note:
FRUs. A failed cooling fan requires replacement of the power supply.

Refresh the Event Log

To ensure that recently-created events appear in the Event Log, periodically
refresh the log display. This is particularly important when inspecting the log for
informational event codes to verify a repair procedure. To refresh the log, click
Refresh at the bottom of the log window.

Clear the Event Log

To ensure that the Event Log is up-to-date and not filled with archived events,
periodically clear the log display. To clear the log, click Clear at the bottom of the
log window.

Hardware Log

The Hardware Log
replacements (insertions) for the switch. The information is useful to maintenance
personnel for fault isolation and repair verification.
Figure 30: Hardware log
To open the Hardware Log, select Hardware Log from the Logs menu on the
navigation control panel.
Edge Switch 2/24 Service Manual
Three cooling fans are integrated in each power supply. Cooling fans are not
Event Data–up to 32 bytes of supplementary event data (if available for the
event) in hexadecimal format. Refer to
explanation of the supplementary event data.
(Figure
"Event
30) displays a history of FRU removals and
Repair Information
Codes" on page 225 for an
133