Diagnostics
Figure 19: Hyperteminal window
11. Record the switch IP address.
12. Select Exit from the File pull-down menu to close the HyperTerminal
Figure 20: Disconnect message box
13. Click Yes. The following message box displays:
Figure 21: Save Session message
14. Click No to exit and close the HyperTerminal application.
15. Power off the maintenance terminal.
16. Disconnect the RS-232 modem cable from the switch and the maintenance
Continue.
84
application. The following message box displays:
terminal. Replace the protective cap over the maintenance port.
Edge Switch 2/24 Service Manual