HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 193

Table 25: HAFM application messages (Continued)
Cannot modify
product.
Cannot perform
operation. Fabric is
unknown.
Cannot perform
operation. The list of
attached nodes is
unavailable.
Cannot retrieve current
SNMP configuration.
Cannot save current
SNMP configuration.
Cannot set write
authorization without
defining a community
name.
Cannot show zoning
library. No fabric
exists.
Click OK to remove all
contents from log.
Edge Switch 2/24 Service Manual
Message
The selected product
cannot be modified.
This message displays
if no switches in the
fabric are connected
to the HAFM server.
This message displays
when attached nodes
are unavailable and
the user attempts to
modify a zone or
create a new zone.
The current SNMP
configuration could
not be retrieved.
The current SNMP
configuration could
not be saved.
An SNMP community
name is not
configured.
The user cannot show
the zoning library if no
fabric exists. A
Director or Edge
Switch must be
identified to the HAFM
application for a
fabric to exist.
This action deletes all
contents from the
selected log.
Description
Verify the HAFM
server-to-product link is up.
If the link is up, the HAFM
server may be busy.
Another Product Manager
instance may be open.
The user may not have
permission to modify the
product.
Ensure at least one
fabric-attached switch or
director has an Ethernet
connection to the HAFM server
and retry the operation.
Verify an attached node is
available and retry the
operation.
Try again. If the problem
persists, contact the next level
of support.
Try again. If the problem
persists, contact the next level
of support.
Enter a valid community name
in the Configure SNMP dialog
box.
Identify a Director or Edge
Switch to the HAFM application
from the New Product dialog
box.
Click OK to delete the log
contents or Cancel to cancel the
operation.
Messages
Action
191