11
Verify operation of the Ethernet hub or hubs. Inspect each hub for indications of
being powered on, such as:
Is a hub failure indicated?
YES
12
Remove and replace the Ethernet hub. Refer to the supporting documentation
shipped with the hub for instructions.
Did hub replacement solve the problem?
NO
Contact the next level of support. Exit MAP.
13
A problem with another LAN-attached device is indicated.
Did repair of an unrelated LAN-attached device solve the problem?
NO
Contact the next level of support. Exit MAP.
Edge Switch 2/24 Service Manual
Green Power LED illuminated.
Green Status LEDs illuminated.
NO
Go to
step
13.
YES
The switch-to-server connection is restored and appears operational.
Exit MAP.
If the problem is associated with another switch or HAFM server (or
customer-supplied server), go to
isolate the problem for that device. Exit MAP.
If the problem is associated with an unrelated device, notify the customer and
have the system administrator correct the problem.
YES
The switch-to-server connection is restored and appears operational.
Exit MAP.
"MAP 0000: Start
MAP" on page 33 to
Diagnostics
77