Managing Firmware Versions; Determining An Edge Switch Firmware Version; Firmware Library Dialog Box - HP 316095-B21 Installation Manual

6

Managing firmware versions

You can download the Edge Switch's internal operating code from the HAFM appliance. Up to
eight versions can be stored on the HAFM appliance hard drive and made available for download
to an Edge Switch. This chapter contains information on the following firmware management tasks:
• Determining an Edge Switch firmware
• Adding a firmware
• Modifying a firmware version
• Deleting a firmware
• Downloading a firmware version to an Edge
• Backing up the
• Restoring the

Determining an Edge Switch firmware version

To determine an Edge Switch firmware version from the management appliance (Element Manager
application):
1. At the management appliance, open the HAFM application.
2. At the HAFM application's physical map, right-click the product icon representing the Edge
Switch to be inspected for firmware version, and then select Element Manager from the pop-up
menu.
The application opens.
3. Select Maintenance > Firmware Library.
The Firmware Library dialog box is displayed
Figure 58

Firmware Library dialog box

The active firmware version is displayed at the lower left corner of the dialog box in XX.YY.ZZ
format. The XX is the version level, YY is the release level, and ZZ is the patch level.
4. Click Close.
version, page 100
description, page 102
version, page 103
configuration, page 105
configuration, page 105
version, page 99
Switch, page 103
(Figure 58).
Edge Switch 2/32 installation guide 99