HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 30

Diagnostics
Table 4: Event Codes and Associated Maintenance Action (Continued)
Event
Code
070
071
072
073
074
080
081
120
121
200
201
203
204
206
207
300
301
30
Explanation
E_Port is segmented.
Switch is isolated.
E_Port connected to
unsupported switch.
Fabric initialization error.
ILS frame delivery error
threshold exceeded.
Unauthorized World Wide
Name.
Invalid attachment.
Error while processing system
management command.
Zone set activation failed -
zone set too large.
Power supply AC voltage
failure.
Power supply DC voltage
failure.
Power supply AC voltage
recovery.
Power supply DC voltage
recovery.
Power supply removed.
Power supply installed.
Cooling fan propeller failed.
Cooling fan propeller failed.
Action
Go to MAP 0700: Fabric, ISL, and
Segmented Port Problem
Determination.
Go to MAP 0700: Fabric, ISL, and
Segmented Port Problem
Determination.
Go to MAP 0700: Fabric, ISL, and
Segmented Port Problem
Determination.
Refer to Collecting Maintenance Data
on page 148.
Refer to Collecting Maintenance Data
on page 148.
Go to MAP 0600: Port Failure and
Link Incident Analysis.
Go to MAP 0600: Port Failure and
Link Incident Analysis
Go to MAP 0600: Port Failure and
Link Incident Analysis
Reduce size of zone set and retry.
Go to MAP 0100: Power Distribution
Analysis.
Go to MAP 0100: Power Distribution
Analysis.
No action required.
No action required.
Replace FRU.
No action required.
Go to MAP 0500: FRU Failure
Analysis.
Go to MAP 0500: FRU Failure
Analysis.
Edge Switch 2/24 Service Manual