Table of Contents
Advertisement
4
Manage firmware versions
The Edge Switch 2/32 internal operating code is downloaded from the HAFM appliance and
stored on a CTP2 card. Up to eight versions can be stored on HAFM appliance hard drive and
made available for download to an edge switch. This chapter contains information on the following
firmware management tasks:
• Determine a switch firmware
• Add a firmware
• Modify a Firmware version
• Delete a firmware
• Download a firmware version to a
• Back up the
Determine a switch firmware version
To determine a switch firmware version from the management appliance (Element Manager
application):
1.
At the management appliance, open the HAFM application.
2.
At the HAFM application's physical map, right-click the product icon representing the switch to
be inspected for firmware version, then select Element Manager from the pop-up menu. The
application opens.
3.
Select the Firmware Library from the Maintenance menu. The Firmware Library dialog box is
displayed
Figure 55
Firmware Library dialog box
4.
The active firmware version is displayed at the lower left corner of the dialog box in XX.YY.ZZ
format. The XX is the version level,
5.
Click Close.
version, page 87
version, page 88
description, page 90
version, page 90
configuration, page 92
(Figure
55).
switch, page 91
YY
is the release level, and ZZ is the patch level.
Edge Switch 2/32 installation guide
87
Advertisement
Table of Contents
