Modifying A Firmware Version Description; New Firmware Version Dialog Box; New Firmware Description Dialog Box - HP StorageWorks Director 2/140 Installation Manual

The New Firmware Version dialog box appears

New Firmware Version dialog box

Figure 48
6. Select the desired firmware version file (downloaded in
backup drive, CD-ROM drive, or hard drive.
Verify that the correct directory path and filename display in the File name box and click Save.
The New Firmware Description dialog box appears
Figure 49

New Firmware Description dialog box

7. Enter a description (up to 24 characters in length) for the new firmware version and click OK.
HP recommends the description include the installation date and text that uniquely identifies the
firmware version.
A Transfer Complete message box appears indicating the new firmware version is stored on the
HAFM appliance hard drive.
8. Click Close to close the message box.
The new firmware version and associated description appear in the Director Firmware Library
dialog box.
9. Click Close.
10.To send the firmware version to a director, see
on page 82.

Modifying a firmware version description

Use these steps to modify the description of a director firmware version in the library stored on the
HAFM appliance hard drive:
1. Open the HAFM application.
The View All - HAFM 8.6 main window appears.
2. Double-click the icon representing the director for which the firmware version description will be
modified.
The Hardware View page for the selected director appears.
(Figure 48).
step 1) from the HAFM appliance
(Figure 49).
"Downloading a firmware version to a
Director 2/140 installation guide
director"
81