HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 100

Diagnostics
4. Click Activate to save the configuration information and close the window.
Did reconfiguring the port type solve the problem?
NO
Contact the next level of support. Exit MAP.
18
The switch is configured for Open Fabric mode but the switch or switch at the
other end of the ISL is not configured to Open Fabric mode, or switch is
connected to a non-HP switch and the interop mode is set to Homogeneous Fabric
mode.
Configure the switch operating mode:
1. Ensure the switch is set offline
2. At the Hardware View for the selected switch, click Configure and select
Figure 23: Configure Fabric Parameters dialog box
100
YES
The switch appears operational. Exit MAP.
page 150).
Fabric Parameters. The Configure Fabric Parameters dialog box displays
(Figure 23).
("Set the Switch Online or
Edge Switch 2/24 Service Manual
Offline" on