Set Offline State; Set Offline Warning Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

Set Offline State

To set the switch offline:
1. Notify the customer the switch is to be set offline. Ensure the customer's
2. At the HAFM server, open the HAFM application. The Product View
3. Select the icon representing the switch to be set offline. The Hardware View
4. At the navigation control panel, select Set Online State from the
Figure 40: Set Offline Warning dialog box
5. Click Set Offline. A Warning dialog box displays, indicating the switch is to
6. Click OK. As the switch goes offline, inspect the Product Manager
Edge Switch 2/24 Service Manual
system administrator quiesces Fibre Channel frame traffic through the switch
and sets attached devices offline.
displays.
for the selected switch displays.
Maintenance menu. If the switch is online, the Set Online State dialog box
displays, indicating the state is ONLINE.
be set offline.
application. The State field of the Status table displays OFFLINE.
Repair Information
151