Installing A Pci Riser Card; Figure 60. Installing Riser Card Onto Riser Assembly - Intel SR1530AH - Server System - 0 MB RAM User Manual

8. Install the replacement riser connector, if desired. For instructions, see
PCI Riser Card" on page
9. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page
10. Install the server system cover. For instructions, see
Cover".
11. Plug all peripheral devices and the AC power cable into the server.

Installing a PCI Riser Card

1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System
4. Disconnect any cables attached to any add-in cards.
5. Remove the PCI riser assembly. For instructions, see
Assembly" on page
6. Remove any add-in cards from the PCI riser connector. For instructions, see
"Removing a PCI Add-in Card" on page
7. Use two screws to attach the riser card to the riser assembly. See the figure below.
8. Install an PCI add-in card if desired. For instructions, see
Card" on page
9. Install the PCI riser assembly into the server system. For instructions, see
"Installing the PCI Riser Assembly" on page
10. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.
®
Intel Server System SR1530AH / SR1530AHLX / SR1530HAHLX
63.
iii.
Cover".
60.

Figure 60. Installing Riser Card onto Riser Assembly

64.
61.
"Installing the Server System
"Removing the Server
"Removing the PCI Riser
65.
"Installing a PCI Add-in
61.
"Installing a
"Safety
AF001060
63