Removing And Installing The Front Bezel Assembly; Removing The Front Bezel Assembly; Figure 21. Installing Right Side Cover - Intel SC5650SCWS Service Manual

Removing and Installing the Front Bezel Assembly

Removing the Front Bezel Assembly

1. Observe the safety and ESD precautions listed in Appendix A,
2. Turn off all peripheral devices connected to the workstation. Turn off the workstation.
3. Disconnect the AC power cord.
4. Remove the left side cover. For instructions, see
5. Disengage the two bezel tabs from the left side of the chassis (see letter "A" in the following figure). Rotate the left side of
the front bezel assembly outward slightly (see letter "B"). Disengage the three clips that attach the right side of the front
bezel assembly to the chassis and remove (see letter "C").
Intel® Workstation System SC5650SCWS Service Guide

Figure 21. Installing Right Side Cover

"Removing the Left Side
Hardware Installations and Upgrades
"Safety Information".
Cover".
33