Rmm Lan (Rl) Configuration; Boot Device (Bdev); Banner (Ban); Figure 22: State Transition Diagram For Setting Ip Address - Intel A1U2ULCP Technical Product Specification

Intel® Local Control Panel for EPSD Platforms TPS
Pos:

Figure 22: State transition diagram for setting IP Address

3.6.2

RMM LAN (RL) Configuration

Same screen shots and the same description as mentioned in BMC LAN (BL) Configuration are
applicable for RMM LAN configuration menu also. However, the values configured will be
assigned to LAN parameters of RMM module rather than that of BMC.
3.6.3

Boot Device (BDev)

If the user selects BDev in the Conf menu, then the following options will be displayed. The
selected item will be set as the next boot option.
3.6.4

Banner (Ban)

When the user selects Ban in the Conf menu, the following options will be displayed. The
selected item will be set as the banner and the same will be displayed from the next banner
screen onwards.
Each of the menu items are explained below:

SN (System Name): Displays the value specified in the product name in the product
FRU information in the main board BMC FRU. System Name is the default banner.
Revision 1.0
Enter
Left
x-1
Right
|DVD|HD|NetBoot|EFI

Figure 23: Boot options configuration menu

|SN|SM|Err|BIP|RIP|Pow|LPC|CStr

Figure 24: Banner configuration menu

Intel order number G83726-001
Left/
Right
Increment/
Decrement
Enter
Right
Pos:
x
Left
Firmware Functional Specification
Pos:
x+1
13