Syntax
•
interface range port-channel {port-channel-range | all}
•
port-channel-range — List of port-channels to configure. Separate non-consecutive port-channels
with a comma and no spaces. A hyphen designates a range of port-channels.
•
all — All the channel-ports.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
•
Commands under the interface range context are executed independently on each interface in the
range: If the command returns an error on one of the interfaces, it will not stop the execution of the
command on other interfaces.
Example
The following example shows how port-channels 1, 2 and 8 are grouped to receive the same command.
Console (config)# interface range port-channel 1-2
Console (config-if)#
channel-group
The channel-group Interface Configuration mode command associates a port with a port-channel. Use
the no form of this command to remove a port from a port channel.
Syntax
•
channel-group port-channel-number mode {on | auto}
•
no channel-group
•
port-channel_number — Specifies the number of the valid port-channel for the current port to
join.
•
on — Forces the port to join a channel.
•
auto — Allows the port to join a channel as a result of an LACP operation.
Default Configuration
The port is not assigned to any port-channel.
282
Port Channel Commands