Secstatsreset - Brocade Communications Systems 8 Command Reference Manual

Fabric os command reference manual supporting fabric

Hide thumbs Also See for 8:

Table of Contents

secStatsReset

Resets one or all security statistics to 0.

secstatsreset [name][," domain[;domain]"]

Use this command to reset one or all security statistics to 0. This command can be issued on any

switch to reset the security statistics on the local switch or chassis. If an FCS policy is enabled and

secStatsReset is issued on the primary FCS switch, this command can reset security statistics for

any or all switches in the fabric.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

When invoked without operands, this command displays the security statistics on the local switch

or chassis. The following operands are optional:

Specify the name of a security statistic you would like to reset. The specified

policy name must be capitalized. If executed on the primary FCS, specify an

asterisk (*) to reset all security policies. Valid values for this operand are:

TELNET_POLICY

RSNMP_POLICY

WSNMP_POLICY

SERIAL_POLICY

FRONTPANEL_POLICY

INVALID_SIGN

INVALID_CERT

SLAP_BAD_PKT

Fabric OS Command Reference

53-1001764-02