Network Configuration Menu - Cisco 7975G Software Manual

Network Configuration Menu

Unlock and Lock Options, on page 63
Value Input Guidelines, on page 63
Network Configuration Menu, on page 66
Device Configuration Menu, on page 85
Network Configuration Menu
The Network Configuration menu provides options for viewing and modifying various network settings. The
following tables describe these options and, where applicable, explains how to change them.
For information about how to access the Network Configuration menu, see
62.
The phone also has a Network Configuration menu that you access directly from the Settings menu. For
Note
information about the options on that menu, see
Before you can change an option on this menu, you must unlock options as described in
Options, on page
only if options are unlocked.
For information about the keys you can use to edit options, see
Table 11: Network Configuration Menu Options
Option
IPv4 Configuration
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
66
63. The Edit, Yes, or No softkeys for modifying network configuration options appear
Description
Internet Protocol v4 address menu. In the IPv4
Configuration menu, you can do the following:
• Enable or disable the phone to use the
IPv4 address that is assigned by the
DHCPv4 server.
• Manually set the IPv4 Address, Subnet
Mask, Default Routers, DNSv4 Server,
and Alternate TFTP servers for IPv4.
For more information on the IPv4 address
fields, refer to the specific field within this
table.
Display Settings Menu, on page
Network Configuration Menu, on page
Value Input Guidelines, on page
To Change
Set IPv4 Configuration Fields, on page
75
Cisco Unified IP Phone Settings
103.
Unlock and Lock
63.