Display Settings Menu; Unlock And Lock Options; Value Input Guidelines; Network Configuration Menu - Cisco 7941G Administration Manual

Network Configuration Menu

Device Configuration Menu, on page 26
Network Configuration Menu
The Network Configuration menu provides options for viewing and making a variety of network settings.
The following tables describe these options and, where applicable, explain how to change them.
For information about how to access the Network Configuration menu, see
2.
Note The phone also has a Network Configuration menu that you access directly from the Settings menu. For
information about the options on that menu, see the table below.
Before you can change an option on this menu, you must unlock options as described in the
Options, on page
if options are unlocked.
For information about the keys you can use to edit options, see
Table 2: Network Configuration Menu Options
Option
IPv4 Configuration
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
6
2. The Edit, Yes, or No softkeys for changing network configuration options appear only
Description
Internet Protocol v4 address menu.
In the IPv4 Configuration menu, you can do
the following:
• Enable or disable the phone to use the
IPv4 address that is assigned by the
DHCPv4 server.
• Manually set the IPv4 Address, Subnet
Mask, Default Routers, DNSv4 Server,
and Alternate TFTP servers for IPv4.
For more information on the IPv4 address
fields, see the specific field within this table.
Cisco Unified IP Phone Settings
Display Settings Menu, on page
Unlock and Lock
Value Input Guidelines, on page
To Change
Set IPv4 Configuration Fields,
on page 16
3.