Labconco Cell Logic A2 User Manual page 64

Memory Failure
The internal memory storage has failed. The calibration settings may be compromised.
Contact Service before use. Press [OK] on the keypad to acknowledge that a memory
failure has occurred.
Figure 6-20
DO NOT USE THE CABINET UNTIL THE PROBLEM HAS BEEN CORRECTED.
Blower Failure Alarm
The blower motor has failed, or the motor and display circuit board are not
communicating properly. Press [BLOWER] on the keypad to clear the alarm.
Figure 6-21
DO NOT USE THE CABINET UNTIL THE PROBLEM HAS BEEN CORRECTED.
64