Labconco Cell Logic A2 User Manual page 54

Activating Email Alerts
Touch [Alerts]. If a valid network connection has been established and Network settings
have been properly configured, (via the
selected users, by entering the appropriate email address(es) and selecting the type of
alerts to be sent to each email address. To enable e-mail alerts, follow these
instructions:
Each cabinet requires its own email address. Before proceeding, set up an email
address for each cabinet. The e-mail account can be any free service (i.e. gmail.com,
outlook.com, etc.) or a company's hosted domain (i.e. xyzlabs.com).
Once the e-mail account(s) are set up, obtain the following information for each account
(e-mail address):
•
SMTP Server
•
SMTP Username
•
SMTP Password
•
SMTP Port Number
•
Encrypted Connection
Here is an example (this information will not be correct for your e-mail account) set-up
for fake e-mail account:
•
smtp.gmail.com
•
Cell Logic123
•
cat@ndmouse457
•
587
•
Enable
Select the Gears icon
entering the appropriate information for the cabinet's email address in all fields, touch
[SAVE]. The system will check valid formatting only. If one or more invalid entries are
found the following message will appear:
retry.
If all the SMTP fields entered are valid, but the network connection is not working (or
Ethernet cable is not connected) the message
connection is not active" will appear. Resolve the connectivity problem and retry.
Network
Cell Logic123@gmail.com
(shown in Figure 6-9) and a settings pop-up will display. After
Email Settings
screen) alerts can be emailed to
Error. Correct the error and
"Email Settings Error – Network
54