Software Update Via Usb Thumbdrive; Software Update Via The Ethernet; Automatic Update Notification - Labconco Cell Logic A2 User Manual

Software Update via USB Thumbdrive

To update the software via USB, you must first download the latest version,
available at Labconco.com
•
The blower must be shut off prior to updating.
•
With the proper software file on a thumbdrive, insert it into the USB Port
on the front of the cabinet to the right of the Display.
•
A pop-up will prompt you to allow the software to access the files on the
thumbdrive. This is a security feature of the Android-based software. You
must touch [OK]
The thumbdrive must be properly formatted as FAT32. If it is not, the
update process will not proceed, and you will receive a pop-up
instructing you that the drive is not properly formatted. If this occurs,
you must reformat the thumbdrive using a PC or laptop to FAT32. For
Windows users, you must select "FAT32" when formatting the
thumbdrive, and not
•
Touch the [UPDATE]
on the pop-up that appears; touch [OK].
•
The update will begin, and the screen will not allow interaction until the
process is complete.
•
The system will notify you when the upload is complete and successful.
Touch [Install]. Touch [Open].
•
The Home Screen
[OK/MUTE]
USB port.
Do not remove power during the update process. If power is lost, the software
may be corrupted, and the cabinet will be inoperable.

Software Update via the Ethernet

To update the software via the ethernet, you must first have an active
connection.
•
From the About
•
If available, the
ignore, postpone or update now.
•
Pressing the
•
If available and you would like to update, select

Automatic Update Notification

To Program the cabinet to notify you if upgrades are available, the system must
have a valid ethernet connection.
•
From the About
to a USB thumbdrive.
to continue.
"FAT32
button on the
will appear with a Power Loss Alarm. Press the
key. Update is complete. Remove the thumbdrive from the
Screen, touch [CHECK FOR
Upgrade Available
[RELEASE NOTES]
Screen, touch [CHECK FOR
58
(default)".
About screen. Select the software file
UPGRADE].
screen will display and allow you to
will allow you to review the changes.
[UPDATE
UPGRADE].
NOW].