Labconco Cell Logic A2 User Manual page 49

•
Airflow Sensor (AFS)
disable the AFS features. See
•
Canopy Connection
the canopy features. The canopy connection will be visible on the
•
Particle Counter
20mA output signal will enable the particle counter features.
•
Show Timer on Home Screen
or disable the timer on the
•
– Touching the toggle between ON & OFF will enable or disable the Gas
Gas Valve
Valve features. If the Gas Valve is factory installed, this toggle will be enabled.
•
Device Name
this name, touch the current device name and use the keyboard to enter a new
name. When finished, touch the
To save any changes, touch [Save].
Setting Automatic Operation Options (Night-Smart
The cabinet allows configuration to activate functions automatically when the sash is
opened or closed. The optional automation would control the blower and lights of the
BSC.
To automate the BSC's Blower or Lights when the sash is raised, touch
the Configuration Screen
currently selected option at the top of the screen. Reference Figure 6-6. If you want the
cabinet Blower to start every time the sash is opened from the closed position, touch the
– Touching the toggle between ON & OFF will enable or
Section 9: Accessories
– Touching the toggle between ON & OFF will enable or disable
– Touching the scroll down menu to change from disable to a 4-
– Touching the toggle between ON & OFF will enable
Home Screen
– The default cabinet name is 'Labconco Biosafety Cabinet'. To alter
[Green
(reference Figure 6-5). The
for more information.
(shown in Figure 6-1 of this section).
Checkmark].
Figure 6-5
TM TM
/ Smart-Start
Smart-Start Screen
49
Home Screen.
)
[Smart-Start]
shows the
in