Labconco Cell Logic A2 User Manual page 24

Step 1
Carefully remove the outer carton and inspect the product for damage that may have
occurred in transit. If the product is damaged, take pictures of the product and the outer
packaging, and notify the delivery carrier immediately. Retain the entire shipment,
including outer packaging, intact for inspection by the carrier.
Note: United States Interstate Commerce Commission rules require that claims be filed
with the delivery carrier within fifteen (15) days of delivery.
Do not return goods without the prior authorization of Labconco. Unauthorized returns
will not be accepted.
If the product was damaged in transit, you must file a claim directly with the freight
carrier. Labconco Corporation and its dealers are not responsible for shipping damages.
Do not discard the carton or packing material for the product until all of the components
have been checked, installed and tested.
The product is secured to the pallet in two places on each side. To access the nuts and
bolts holding the product to the pallet, remove the side panels by removing and keeping
the two Phillips screws on both panels. Swing the front of each panel away from the
cabinet, and lift it straight up to remove the panel from the cabinet. See Figure 4-1.
Yellow string
(to left-end Pin)
Parts Box
Figure 4-1
The side panels must be
removed to access the
fasteners that secure the
biosafety cabinet to the pallet.
DO NOT attempt to lift the
biosafety cabinet by the
side panels; damage will
occur.
Yellow string
(to right-end Pin)
Shipping Bolts
(2 per side)
24