Labconco Cell Logic A2 User Manual page 47

• AFS Downflow (Optional)
• Particle Count Status (Optional)
To change what parameters are visible on the display screen, select the
(shown in the top left-hand corner of Figure 6-3).
To search through individual logs by a phrase or numerical value, use the
Function by touching
Figure 6-3. Type the desired search phrase into the bar. To move through the found
matches of the search phrase, touch the
icons. Touch the [X]
All alerts/alarms will be recorded and represented with a code. The alert code
descriptions can be seen by touching the
6-3) and are as follows:
[Search] (represented by the magnifying glass icon) shown in
(reference Figure 6-3) to exit the
Alert Codes
AD
BF
EX
FL
HE
PL
SA
[Forward] and [Backward]
Search
ALERT column heading (as shown in Figure
Descriptions
Check for Airflow Blockage
Blower Failure
Exhaust Failure
Filter Life at 0%
Building Exhaust Too High
Power Loss
Sash Out of Position
47
[Gears]
Search
magnifying glass
Function.
Figure 6-3
Table 6-1