Labconco Cell Logic A2 User Manual page 50

icon to activate. The description under Open Sash should read 'Start
[Blower On]
Blower'. If [Blower Off] is selected, the blower must be manually started from the
keypad. If you want the cabinet Lights to illuminate every time the sash is opened from
the closed position, touch the [Light On] icon to activate. The description under Open
Sash should read 'Light On'. If
[Light Off] is selected, the lights must be manually
illuminated from the keypad.
To save any changes, touch [Save].
To automate the BSC's Blower or UV Light when the sash is closed, touch
[Night-
Smart] in the Configuration Screen (reference Figure 6-5). The Night-Smart Screen
shows the currently selected option at the top of the screen. Reference Figure 6-6. If
you want the cabinet Blower to run slowly, maintaining reduced airflows every time you
close the sash, touch the [Reduce Blower] icon to activate. The description under
Open Sash should read 'Reduce Blower'. If
[Blower Off] is selected, the blower will
stop when the sash is closed. If you want the UV Light to illuminate every time the sash
is closed, touch the [UV Light On] icon to activate. The description under Close Sash
should read 'UV Light On'. If
[UV Light Off] is selected, the lights must be manually
illuminated from the keypad.
To save any changes made, touch [Save].
Figure 6-6
Smart-Start Screen Night-Smart Screen
50